Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Symptom
Cause
Solution
No sound
Cables not properly connected.
Connect cables securely.
Disc warped or dirty.
Clean your disc.
Player in mute status.
Press MUTE button again.
No picture
Cables not properly connected.
Connect cables properly.
Correct input not selected on TV.
Reset the AV/TV status of your TV set.
No color
TV system not right.
Press PAL/NTSC button.
TV set color not properly adjusted.
Adjust color of the TV set.
No disc reading
No disc in the player.
Disc not properly loaded.
Condensation on the laser head.
Load a disc
Reload a disc, with the label side facing up.
Turn off the player, unload the disc and leave it on for
about an hour
Remote control
Remote control not pointing to the
Point the remote at the unit.
failure
sensor window.
Remote control s operating distance
Use the remote control within 8 meters of the unit.
more than 8 meters away from the TV.
Batteries low.
Replace the batteries.
Temporary
Badly fabricated disc used.
Wait 5-10secs and the player will return to normal
function failure
Wrong buttons pressed.
External electrical interference
operation once more.
Wait 1-3 seconds and press correct button
Turn of the player for 1 — 2 mins then switch back on. If
problem persists relocate the player or eliminate source of
interference.
Rolling Picture
TV set not properly adjusted
Incorrect output format on DVD unit
Readjust TV system
Select correct output format for your TV (PAL/NTSC)
According to waste of Electrical and Electronic Equipment (WEEE) directive,
WEEE should be separately collected and treated. If at any time in future you
Household wasted. Please send this product to WEEE collecting points where available.
In order to fulfill ruling UNE EN-60065, we indicate that if the flexible wire
is damaged, it can only be substituted by a technical service recognized by
NEVIR, S.A., as per special tooling is required.
need to dispose of this product please DO NOT dispose of this product with
Q E ce
45
Publicidad
