Maintenance_
Cleaning the blade
Move the switch to the OFF position.
■ Removing the Blade
1. Slide the blade lock in the direc¬
tion indicated below.
2
.
Remove the blade by pulling it in
the direction indicated below.
Clean the inside of the blade.
• Do not use water to clean, as this
will damage the unit.
■ Installing the Blade
1
• Align the hole in the blade with the
projection at the end of the holder.
2
.
Slide the blade lock in the direc¬
tion indicated below.
• The button is easier to slide if you
use your fingernail.
Cautions_
• When cleaning the outside of the unit,
use a dry cloth or a cloth moistened
in liquid soap to wipe dirt. Never use
thinner, benzene or alcohol.
• The micro fine trimmer is very thin.
If handled roughly, it can be dam¬
aged and cause skin injury.
• If you have sensitive skin, use care
when trimming the sensitive areas
around the mouth and eyebrows.
• When the trimmer begins losing
power, replace the battery. The bat-
tery may leak if not replaced
promptly when it reaches the end of
its life span.
3