Troubleshooting Guide - Sherwood AX-5505 Manual De Instrucciones

AX5505(G-Eng)100204_AX5505(Eng).qxp 2010-02-23 오후 2:04 페이지 12

Troubleshooting Guide

If your unit should not perform as expected, consult the table below to see if the problem can be corrected
before seeking help from your dealer or our service organization.
PROBLEM
No power
No sound
No recording
POSSIBLE CAUSE
• The AC input cord is disconnected
• Poor connection at AC wall outlet or the outlet
is inactive.
• Speaker cords are disconnected.
• Both SPEAKER SELECTOR A and B buttons
are set to off.
• The volume is adjusted too low.
• The MUTE button on the remote control is
pressed to ON.
• Incorrect selection of input source.
• Incorrect connections between the
components.
• Incorrect connections.
• Incorrect operation of the tape deck (or MD
recorder).
12
REMEDY
• Connect the cord securely.
• Check the outlet using a lamp or
another appliance.
• Check the speaker connections.
• Switch the desired speakers on.
• Adjust the volume.
• Press the MUTE button to cancel the
muting effect.
• Select the desired input source
correctly.
• Make connections correctly.
• Make connections correctly.
• Operate the tape deck (or MD
recorder) correctly.