ETI MWPK-WG-SM Guía De Uso Y Cuidado

PACKAGE CONTENTS
Description Quantity
Light Shield Kit 1 Set
NOTE: Keep your receipt and these instructions for proof of purchase. To avoid possibility of electrical shock or fire, the installation personnel must have professional electric
knowledge. Please wear gloves to avoid injury before installation. If any smoke or spark of the wire happened, please turn off the power immediately and notify relevant
personnel. Please use listed water proof strain relief bushing when connecting the supply cord to the outlet box.
WARNING: Shut off the power at the circuit breaker or fuse panel before removing the old fixture, ballast, or fluorescent tubes. Do not use any electric generator to test the LED
light. Please abide by related country, regional and local law and regulations when install this fixture. Please turn off the power before installation or maintenance. Proper grounding
is required to ensure safety. Please check if there is any damage during shipping. If so, please contact manufacturer timely. Please read the installation instruction carefully to check
whether all the accessories are available. After confirmation, install the led light according to installation steps.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
INSTALLATION OF LIGHT SHIELD
Put the shield on the fixture as illustrated.
Tighten up the screws as illustrated.
INSTALLATION OF WIRE GUARD
Put the Wire Guard on the fixture as illustrated.
Tighten up the screws as illustrated.
SHIELD AND WIRE GUARD INSTALL TOGETHER
Put the shield on the fixture.
1
WARNING: Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock,
fire, or other injuries which could be hazardous or even fatal. • Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit
breaker.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
See website for Warranty, Troubleshooting or Care and Cleaning details at www.ETiSSL.com.
USE AND CARE GUIDE
WIRE GUARD AND LIGHT SHIELD INSTALLATION
Light Shield Kit
Put the Wire guard on the top of Shield.
2
Questions, problems, missing parts? Call ETiSSL Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday
1-855-ETI-SSLI (1-855-384-7754) www.ETiSSL.com
PACKAGE CONTENTS
Description Quantity
Wire Guard Kit 1 Set
Order # 70537101 Part # MWPK-WG-SM
70538101
70706101
70707101
Tighten up the screws.
3
MWPK-WG-LG
MWPK-SH-SM
MWPK-SH-LG
Wire Guard Kit