Ibiza Light E-WASH100 Manual De Instrucciones página 3

MANUAL - E-WASH100
DMX-CONTROLLED LED ZOOM + WASH MOVING HEAD
CONTENTS OF THE CARTON:
• 1 x Moving head
• 1x Mains lead
• 1x omega bracket
• 1x User Manual
UNPACKING INSTRUCTIONS
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are
present and have been received in good condition. Notify the freight company immediately and retain packing
material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of mis-
handling. Keep the carton and all packing materials. In the event that a fixture must be returned to the factory, it
is important that the fixture be returned in the original factory box and packing.
EXPLANATION OF SYMBOLS
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to electro-
cution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
The unit complies with UK standards
For indoor use only
Protection class I. Requires an earth connection
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
IMPORTANT SAFETY INSTRUCTIONS AND DANGER WARNINGS
• Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the decal or rear panel of the fixture.
• This product is intended for indoor use only!
• It is essential that the device is earthed. A qualified person must carry out the electric connection.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be
sure that no ventilation slots are blocked.
• Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse
size and type.
• Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carry-
ing handles.
• Maximum ambient temperature (Ta) is 35°C. Do not operate the fixture at temperatures higher than this.
• The surface temperature of the unit may reach up to 120°C. DO NOT TOUCH the housing barehand during its
operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or servic-
ing.
• DO NOT OPEN the unit within 5 minutes after switching off.
INSTRUCTION MANUAL
CAUTION
DO NOT OPEN THE HOUSING
SHOCK HAZARD
www.ibiza-light.com
3