Publicidad
Idiomas disponibles
Idiomas disponibles
Safety guidelines for battery chargers
■
This appliance may be used by children aged 8 years and above and by persons with limited
physical, sensory or mental capabilities or lack of experience and knowledge, provided that they
are under supervision or have been told how to use the appliance safely and are aware of the
potential risks. Do not allow children to use the appliance as a toy. Cleaning and user maintenance
tasks may not be carried out by children unless they are supervised.
■
To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their
customer service department or a similarly qualified person.
The charger is suitable for indoor use only.
WARNING!
■
If the power cord requires replacement, this should be carried out by the manufacturer or an
approved representative to avoid safety hazards.
Original accessories/auxiliary equipment
■
Use only the accessories and additional equipment that are specified in the operating instructions
and are compatible with the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades for use with wood and metal.
■
2 saw blades for general wood cutting
■
2 saw blades for general plastic cutting
■
2 saw blade for light metals up to 5 mm
NOTE
a.
You can use any saw blade, provided it is fitted with a suitable mounting (single-lug shank).
Before use
Charging the battery pack (see fig. A)
CAUTION!
►
Always unplug the appliance before you remove the battery pack from or connect the battery pack
to the charger.
NOTE
►
Never charge the battery pack if the ambient temperature is below 10°C or above 40°C. If a
lithium-ion battery is to be stored for an extended period, the charge level should be checked
regularly. The optimum charge level is between 50% and 80%. The storage climate should be cool
and dry and the ambient temperature should be between 0°C and 50°C.
Connect the battery pack 5 to the high-speed battery charger 24 see fig. A).
♦
♦
Insert the power plug into the socket. The control LED 25 lights up red.
♦
The green LED 26 indicates that the charging process is complete and the battery pack 5 is ready.
All manuals and user guides at all-guides.com
- 07 -
Publicidad
