Bonnet Neve Pencil Manual De Instrucciones página 28

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
Cleaning instruction
3.4 Water tray cleaning
IT
• Remove the front cover by unscrewing the
FR
screws.
• Remove
EN EN
condenser.
• Pull out the condenser.
DE
ES
PT
• Clean the water tray and remove any
residue.
N°DOC. UM000673 REV. "A" - 21/03/23
the screws that
PENCIL - TEMPERA
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
3.5
Follow the same disassembly phases in the
reverse order:
• Reinstall the internal structure and the
hold the
shelves.
• Make sure that the brackets are in the
correct position and that the brackets lock
completely into the support when you
reattach them.
• Reinstall the base deck.
• Reinstall the air return grid.
3.6
• After
attentively checking that the inside of the
cabinet is completely dry, put the appliance
back into operation by reconnecting power
to the cabinet.
• The cabinet will then start its cooling cycle.
Allow cabinets to reach a displayed
temperature of -3°C before reloading the
Fig. 18
removed goods.
Fig. 19
Cabinet's assembly
Cabinet restart
completing the
10/10
cleaning and