Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product,
assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: Keep your receipt and these instructions for proof of purchase.
NOTE: The insulation is located on both sides of the canopy. It is required by UL and included to protect the
light fixture from the heat caused by the light bulb(s).The insulation should not be removed.
TOOLS REQUIRED
Wire
Strippers
Flathead
Screwdriver
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
AA
Mounting Bracket
BB
Wire Connector
CC
Ground Screw (8 mm)
DD
Outlet Box Screw (15 mm)
EE
Lock Nut
FF
Hex Nut
GG
Nipple (30 mm)
Safety
Goggles
Phillips
Screwdriver
Quantity
1
3
1
2
1
1
1
3
Please contact 1-877-527-0313 for further assistance.
Ladder
Electrical
Tape
Gloves
Wire
Cutters
HOMEDEPOT.COM
Publicidad
