Comelit 1469 Manual Tecnico página 3

art. 1469
T E C H N I C A L M A N U A L
Simplebus interface for ViP system base
Interface for the management of hybrid video entry
phone system configurations with door-entry phones
and door entry monitors using 2-wire technology
(Simplebus 1 and SimpleBus 2) and devices using IP
technology for the basic system structure (external
units, switchboards, actuator modules, call logs). The
2-wire door-entry phones and door entry monitors
can receive calls from the ViP external unit and
forward commands to ViP devices (self activation,
call to main and/or secondary switchboard, actuator
control, view ViP cameras, view RTSP cameras, etc.).
The interface has 1 Ethernet port for IP video entry
system connection, L-L terminals for connection to
the Simplebus system, power supply: 12-56 VDC.
Dimensions: 70x90x59 (4 DIN modules).
L L
Art.1469
AUTO
SB1 SB2
+ -
RESET
2. 3. 4.
1. LL terminals
Connection to the Simplebus1 or Simplebus2 line
2. Jumper for selecting the bus used
Simplebus1
Simplebus2
Automatic bus selection (default)
3. DIP-switches for reboot with predetermined
4. + - Power supply terminals 33 VDC
5. RJ45 Ethernet port
6. LED indicating Ethernet connection
MAIN FEATURES
•
•
1.
•
•
•
•
•
VIP
TECHNICAL SPECIFICATIONS
+ - terminals power supply
voltage
5. 6.
DC input absorption in
standby
LL max. absorption with
1210A (Simplebus2)
LL absorption in standby
with 1210A (Simplebus2)
Max. absorption with
Simplebus1 configuration
Absorption in standby,
Simplebus1 configuration
network settings and carrying out the factory
reset procedure
Off: No Ethernet connection.
Flashing: Ethernet connection present,
communication active.
Steadily lit: Ethernet connection present, no
active communication.
All ViP devices are compatible with art. 1469.
Art. 1256 can only be controlled on the Simplebus
riser.
An intercom call cannot be made between two
separate Simplebus risers.
Management of audio and audio/video calls from/to
the Simplebus system.
Conversion and mapping of messages from
Simplebus to ViP and vice-versa.
Switchboards may be ViP only.
A secondary Simplebus external unit cannot be
installed.
33 VDC
95 mA - 3,1 W
100 mA 3,2 W
125 mA 4 W
50 mA 1,6 W
120 mA 4 W
130 mA 4.3 W
100 mA 3,3 W