nuliie NUBW01 Manual De Usuario página 14

Troubleshooting
Question
Inappropriate time for heating in
Too hot
Not taken out in time after fast heating.
Inappropriate time for heating in
fast heating mode.
Room temperature is too cold.
The bottle is too thick.
Too cold
Not taken out in time after fast heating.
The bottom of the bottle warmer
is clogged with scale, affecting its
heating effect.
If the screen is blank and the
indicator light on the on/off button
is flashing, the bottle warmer
has shut down and is no longer
operational.
Not working
The bottom reset switch will cut
off power to the device if it is dry to
prevent overheating.
Alot of dirt has accumulated in the
bottom of the bottle.
If problems persist and you suspect a malfunction, please get in touch with our 24/7 live
chat or email us at support@nuliie.com for the best solution.
Cause Analysis
fast heating mode.
Please refer to the manual or
the heating time reference table
prompted by the machine label to
select the appropriate heating time.
Take out the bottle in time.
Reheat for 0.5-1min.
Take out the bottle in time.
Descale the milk warmer every four
weeks.
The screen will light up and start
working when you click the on/off
button again.
To restart the device, you must wait for
the heater to cool down (approximately
10 minutes) or add cold water in it.
Then press the on/off button again.
Descale the milk warmer every four
weeks.
14
Solution