mr.Kate 7769339COM Instrucciones De Montaje página 54

STEP 43
20r
(x4)
With a person on each side, carefully lift
the bed frame in the closed position. While
one person pushes the bed frame into the
cabinet, passed the 90 degrees, the other
person is to engage the "front" Gas Piston
(20h) on each side of the unit, to the front
pin of the Left and Right Pivot Arm (20e &
20f). Then tightly secure with two Nuts
(20r).
To engage the "rear" Gas Piston (20h) on
each side of the unit, slowly and carefully
wiggle the bed frame back and forth until
you can insert the Gas Pistons (20h) onto
the rear pin of the Left and Right Pivot Arm
(20e & 20f). Then tightly secure with two
Nuts (20r).
20e
ameriwoodhome.com
20t
(x1)
20r
20r
this step is continued
20h
push here
into cabinet
on next page...
54