Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PNEUMATIC TOOL/COMPRESSOR PROBLEMS
PROBLEM
CORRECTIVE ACTION
Move switch to ON position
COMPRESSOR WON'T START
Plug power cord in
Reset breaker or replace fuse
Close or tighten
LOW PRESSURE
Replace
Replace
Clean or replace as necessary
Repair or replace
Drain and replace oil
OIL IN DISCHARGE
Drain oil to proper level
Air pressure regulated too high
Clean or replace air filter
Replace piston rings
Clean or replace as necessary
COMPRESSOR OVERHEATS
Clean with compressed air
Reduce pressure
Drain and replace oil
Reduce air consumption requirements
Replace worn parts as necessary
COMPRESSOR LOADS/UNLOADS
OR STARTS/STOPS EXCESSIVELY
Tighten or replace belts as necessary
Have adjustments made by authorized
service location
Replace valves
Use compressor with higher air output ratings
22
Publicidad
