Chicco Polly Easy Instrucciones De Uso página 21

rear of the armrests (diagram 6).
WARNING: The armrests must always be maintained in a horizon-
tal position. The armrests can be maintained in a vertical position
only when closing the High chair.
7. Fix the fabric covers to the High chair frame:
A. Fit the fabric cover to the High chair frame by sliding the safety
harness and D-Rings into the appropriate loops (diagram 7A).
B. Insert the clips into the buckle (diagram 7B).
C. Fit the spring catches (diagram 7C).
8. Insert the footrest, turn it until the use position is reached, and
lock it (diagram 8). The footrest can be adjusted to 3 positions.
The child can now be seated in the High chair.
9. Fit the rigid crotch strap to the activity tray (diagram 9A, diagram
9B). The design of the crotch strap attachment only allows one
type of assembly operation.
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the High chair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the High chair.
FABRIC COVER
To remove the cover from the High chair, repeat, in the reverse order,
the operations described to fit the fabric cover to the frame.
WARNING: Never use the high chair without the fabric cover.
SAFETY HARNESS
WARNING: The use of the safety harness and fabric crotch strap is
necessary to guarantee the safety of your child.
WARNING: The activity tray alone does not guarantee the safety
of your child. Always use the SAFETY HARNESS!
The high chair has a 5-point safety harness.
10. Release the safety harness (diagram 10).
11. Place the child in the high chair and fasten it with the safety
harness (diagram 11).
The safety harness can be adjusted to two height positions.
FITTING / ADJUSTING THE ACTIVITY TRAY
WARNING: IMPORTANT FOR YOUR CHILD'S SAFETY - Always fit
the rigid crotch strap to the activity tray before fitting the tray to
the High chair. Once the rigid crotch strap has been fitted, it must
never be removed.
The activity tray can now be fitted to the High chair.
The activity tray can be adjusted to 4 positions.
12. Hold the activity tray in your hands (diagram 12).
13. Press and hold the bottom button (X), lower the activity tray
into place checking that the armrests (H) slot into the guides
located under the activity tray (diagram 13).
14. Move the activity tray until the desired position is reached
and release the button. If the activity tray is not automatically
locked on the armrests, move the activity tray until a click is
heard, signalling that the tray is locked (diagram 14).
WARNING: Always ensure that the tray is locked correctly to the
armrests before use.
WARNING: Never leave the tray fitted in a position in which the
danger signs are visible on the armrests: IT IS NOT safe!
15. To remove the tray, pull it in an outward direction while keep-
ing the lower button pressed.
ADJUSTING THE HEIGHT OF THE HIGH CHAIR
The High chair can be adjusted to 7 height positions.
16. To raise the seat: Hold the upper part of the backrest and
pull it upward, until the desired height is reached (diagram
15-16).
17. To lower the seat: Press the two side buttons simultaneously
and lower the seat, until the desired height is reached (diagram
17).
WARNING: Do not carry out this operation with the child sitting
in the High chair.
RECLINING BACKREST ADJUSTMENT
The backrest of the High chair can be adjusted to 3 positions.
18. To adjust the inclination of the backrest, press the button lo-
cated at the rear top, recline the backrest until the desired po-
sition is reached and release the button, the backrest will lock
automatically and an audible click is heard, signalling that it is
locked into position (diagram 18). The operation can be car-
ried out also with the child sitting in the High chair, although
it can be more difficult.
LEG REST
The leg rest of the High chair can be adjusted to 3 positions.
19. Press the two side adjustment buttons and recline the leg rest,
until the desired position is reached (diagram 19).
FOOTREST
The footrest of the High chair can be adjusted to 3 height posi-
tions.
20. From the use position, turn the footrest until it is parallel to the
leg rest, and unlock it (diagram 20).
21. Remove the footrest and fit it at the desired height (diagram 21).
22. Turn the footrest until the new desired use position is obtained,
and lock it into position (diagram 22).
WHEELS AND LOCKING SYSTEM
The rear and front legs have swivel wheels with brakes (EE).
To activate the high chair brakes, lower the wheel locking levers. To
release the wheels, repeat in reverse order.
WARNING: Always place the chair on a horizontal, stable surface.
Never place the high chair near stairs or steps.
WARNING: Always engage the parking device when the high
chair is not being moved.
CLOSING THE HIGH CHAIR
WARNING: When closing the high chair, ensure that your child,
or other children, are at a safe distance. Ensure that during these
operations the movable parts of the high chair do not come into
contact with your child.
WARNING: if it is fitted, remove the activity tray before closing the
high chair, and store it away at the rear of the frame using the two
designated fixtures.
23. Put the backrest in a vertical position and the leg rest in a hori-
zontal position (diagram 23).
24. Raise the armrest in a vertical direction by pressing the buttons
located on the lower part of the arm rests, until an audible click
is heard (diagram 24).
25. Fold the side fabric cover flaps inside (diagram 25A) and lift the
leg rest and seat in a vertical position (diagram 25B), a fastening
system maintains the frame compact and closed.
26. Lower the seat by pressing the two side buttons at the same
time, as shown in the diagram (diagram 26).
27. Press the buttons at the centre of the joints and, at the same
time, close the legs of the High chair using your foot (diag. 27A),
until an audible click signals that the High chair is locked in the
closed position.
WARNING: Check that the frame is closed and the wheels are
positioned in a way that the frame can stand upright on its own
(diagram 27B).
WARRANTY
The product is guaranteed against any conformity defect in nor-
mal conditions of use as provided for by the instructions for use.
The warranty shall not therefore apply in the case of damages
caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects please refer to
the specific provisions of national laws applicable in the country of
purchase, where provided.
21