Usb Button; Dc Button; Lcd Display; Ventilation Slots - PATONA Autarc 1200 Manual

EN I PATONA Platinum Powerstation Autarc 1200

03 USB button

► Briefly press the USB button to switch the USB output ports on/off.
► The following outputs are available:
• 2× USB-A 5V 2.4A
• 3× USB-C PD 20W
• 1× USB-C PD 100W

04 DC button

► Briefly press the DC button to switch the DC output ports on/off.
► The following outputs are available:
• 1× CAR 12V 10A
• 1× hollow plug 12V 3A

05 LCD display

01 Usage time/charging time
04 Charge level in %
07 LED light
10 USB output
13 DC output
Meaning of the on-screen symbols
Icon Description
Flashes if the output values are abnormal. Please check the connected devices and connections.
Flashes if there is a charging error. Please check the connection and the power supply.
Input voltage too high. Check the input voltage.
Flashes if the power station is overheated or undercooled. The intelligent protection programme
is triggered automatically and the Powerstation stops operating. Wait until the Powerstation has
acclimatised.
Indicates that the ventilation is running. Check the ventilation slots if necessary. Remove the blo-
ckage and ensure sufficient ventilation.

06 Ventilation slots

► Cooling starts automatically as soon as the power station generates heat.
► Do not block the ventilation slots under any circumstances.
02 Fan status
05 Total input power
08 AC output
11 AC charging
14 Cigarette lighter output
03 High/low temperature protection
06 Total output power
09 Type C output
12 XT60 charging
12