OM SYSTEM M.ZUIKO DIGITAL ED 150-600mm F5.0 6.3 IS Instrucciones página 6

INSTRUCTIONS
EN
Thank you for purchasing this product.
To ensure your safety, please read this
instruction manual before use, and keep it
handy for future reference.
Please use the latest firmware for the camera.
Operations will vary depending on the camera.
For more information, please visit our home
page.
Contact the other manufacturer to mount the
lens on another manufacturer's camera.
Names of parts
1 Lens hood
2 Zoom ring
3 Focus ring
4 Zoom lock switch
5 Mount index
6 Tripod mount lock
screw
7 Focus limiter switch e Hood mounting screw
Zoom ring
Zoom by rotating the zoom ring or holding the
front (a) of the lens and moving it forward or
backward.
8
EN
8 Focus mode switch
9 IS switch
0 Electrical contacts
a Tripod mount
b Strap eyelet
c Tripod mount foot
d L-Fn buttons
Focus mode switch
Switches between AF/MF.
Focus limiter switch
Sets the range of the photographing distance.
Focusing is done within the range that is set.
L-Fn buttons
Pressing any of the L-Fn buttons suspends the
autofocus operation and locks focus. Other roles
can be assigned using camera controls.
The selected role is performed by all three
buttons.
IS switch
Turn image stabilization (IS) on or off.
ON: Stabilizing functions in the lens and
camera operate. The IS operates
according to the IS setting in the camera.
OFF: Stabilizing functions in both the lens and
camera are off.
Zoom lock switch
Use the zoom lock switch to lock the zoom ring
or control the resistance during zoom operation.
L: Lock the zoom ring. While the zoom ring is
rotated to the wide end (150 mm), the zoom