Troubleshooting
Carefully follow the steps to configure your control.
•
If the first group code does not control your TV, try the remaining codes.
If all codes are ineffective or your TV's brand is not in the code list, try to set
up with brand name number.
•
If you mis-press a button when inputting a code, you can input the correct
code while the LED indication light is still lit.
•
If the LED indication light has gone off, you will have to start again.
•
Test your TV receiving function. This does work on TV sets that do not have
a receiving function or if the receiving function does not normally work well.
•
This remote control may seem to be dead under certain mis-operation
conditions. In such cases, just take the batteries out for 20 minutes then put
them back in again. It will be restored to its normal state.
Technical Parameters
Control range: More than 10 m (varies according to your appliance type)
The symbol above and on the product means that the product is classed
as Electrical or Electronic equipment and should not be disposed with other
household or commercial waste at the end of its useful life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive has been
put in place to recycle products using best available recovery and recycling
techniques to minimise the impact on the environment, treat any hazardous
substances and avoid the increasing landfill. Contact local authorities for
information on the correct disposal of Electrical or Electronic equipment.