Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS:
PRE-OPERATING INSTRUCTIONS:
Powering off the heater will stop the heating process only. The fan will continue to blow
for approximately 1 minute to allow for the interior components to cool. The fan will then
turn off automatically.
OPERATING INSTRUCTIONS:
•
Plug the heater into a suitable power outlet, observing all the instruction regarding
positioning and turn on the power switch at the side of the heater.
Note: The heater must be positioned uprightly (Control panel is at the top).
The distance between the heater bottom and the ground should be more than 30cm, the
distance between the side of the heater and the wall or any other object should be more
than 50cm.
•
Press "Power Switch" on side of the unit to "On" position to turn on the heater.
•
Press" On/Off" button, the heater will running automatically;
•
Press "Temp. +" button is for increasing the temperature setting.
•
Press "Temp.-" button is for decreasing the temperature setting
•
Press "Timer" to set timer (0-12 hr).
Power-off Timer: When the heater is on running, Press "Timer" the digital display
changes from the "temperature" to the "hours" option for the timer. Continue to press the
timer button to change the number of hours you would like the heater to run before
powering itself off. The hour options for the timer are from 0 to 12 hrs. (in 1 hr increment).
Power-on Timer: When the heater is off, Press "Timer" the digital display shows the
"hours" option for the timer. Continue to press the timer button to change the number of
hours you would like the heater's internal clock to count down before powering itself on.
The hour options for the timer are from 0 to 12 hrs. ( in 1 hr increment).
•
When finished, Press "ON/OFF " button, the heater will be off automatically in 1
minute, switch the power switch at the side of the heater to "Off" position and
unplug heater from power outlet.
SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the heater will automatically shut off. It
can only resume operation when the user resets the unit.
3. To reset the unit, unplug the heater and wait 15-20 minutes for the unit to cool down.
Turn the unit back on to resume function.
Disposal
At the end of the serviceable life of the product and/or the batteries, it should be
disposed of carefully and safely in accordance with local authority regulations. The
power cord should be cut off from the heater.
Keep these instructions for future reference.
SERVICE INSTRUCTIONS:
Do not attempt to repair or adjust any electrical or mechanical functions on this unit.
⚫
Doing so will void the warranty.
If you have any questions regarding this unit's operation or believe any repair is
⚫
necessary, please call 1-888-672-5832 to speak with a Customer Service
Representative.
If you need to exchange the unit, please return it, in its original carton with a sales
⚫
receipt enclosed, to the store you purchased it. If you are returning the unit more
than 30 days after the date of purchase, please see the enclosed warranty.
If you have any other question or comments, feel free to write us:
⚫
Optimus Enterprise, Inc.
2201 E. Winston Road, Unit J
Anaheim, CA 90806
E-mail:
Service@optimusent.com
Publicidad
