Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNT THE DISPOSER
IMPORTANT: Before performing this step, read it
completely to understand how the disposer is mounted.
1. Apply a small amount of liquid soap (or petroleum
the bottom of the the lower mounting ring to aid its
sliding and rotation onto the upper mounting ring.
Apply
soap
2. Seat the cushion mount onto the top ring of the
disposer.
Cushion
Mount
10
Installation Instructions
Cushion
Mount
Lower
Mounting
Ring
Lower
Mounting
Ring
MOUNT THE DISPOSER (CONT.)
3. Lift and prop the disposer into place on the upper
mounting ring. Mount it by turning the lower mounting
ring until its tabs engage onto the slide ramps of the
upper mounting ring.
Insert a screwdriver into a lower hook and leverage it
counterclockwise into place.
Use channel lock pliers to fully lock the lower
mounting ring tabs onto the upper slide ramps.
Shown fully locked:
Sink
Engage tabs onto
upper slide ramps
mounting ring
to ramp it onto
the upper
mounting ring
Sink
Sink
when fully
locked
49-4000291 Rev 0
Publicidad
