Montarbo NETTUNO 10 Serie Manual De Uso página 24

NETTUNO 10
9
STREAMING AUDIO VIA BLUETOOTH
To connect a device, follow the procedure below to:
Ensure that the device to be paired with the system is on and ready for connection
„
via Bluetooth . With the system on, press the PAIRING button to activate Bluetooth
®
pairing. The corresponding green LED will flash.
Check that the system name (Nettuno 10) appears among those available on the
„
mobile device.
Select the system model to pair the device. The corresponding LED will remain lit to
„
indicate successful connection.
Move the Aux in/Bluetooth
„
levels for the correct playback volume.
10 REMOTE CONTROL
The Bluetooth connection can also be used to control the system remotely via the free
®
Nettuno 10 Controller application, which is available for iPad from the App Store. Once
installed on your tablet, run the application and enable remote control from the APP menu
on the Neptune 10 mixer display. The connection is made immediately.
24
selector to Bluetooth
®
®
and adjust the CH7-8 and main
®
®