Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the water tank and the filters
1. Press the dust-tank release button and remove it. Fig. 10
2. Press the dust-tank release button to open the tank cover and empty it. Fig. 11
3. Use the cleaning brush to clean the filter. Fig. 12
4. Hold the dust tank, remove the filter and lift the filter cover to remove the parts inside.
Fig. 13
5. Wipe all parts with a slightly damp cloth.
6. After cleaning the filter, press the button on the display for 3 seconds to restart.
Motor filter cleaning. Fig. 14
1. Turn the filter cover counterclockwise to remove it.
2. Remove the filter and clean it.
It is recommended to clean the filter at least every six months.
Cleaning the brush and the vacuum head
1. Press the release tab on the hard floor brush and remove the brush as shown in figure 15.
2. Remove hair and debris around the brush with your fingers or the cleaning brush blade.
3. Wash the brush under running water.
4. Allow the brush to dry completely before reassembly.
5. Replace the brush.
Warning:
The motorised brush includes electrical connections, do not immerse in water for
-
cleaning.
Make sure the brush is completely dry before replacing it.
-
6. TROUBLESHOOTING
Error codes
Error code
E1
E2
E3
E4
E5
E6
Error description
Battery overvoltage
Undervoltage or significant battery voltage difference.
Undervoltage, overvoltage or overcurrent of the charger
Switch failure, cannot switch on
Thermistor failure
Main motor disconnected or engine failure
Conga Rockstar 7500 Astral Jaliscazo Animal
ENGLISH
43
Publicidad
