cecotec Cecofry FireDome 8000 Pro Manual De Instrucciones página 47

Use of the internal grill
Splatter screen
Located on the underside of the lid, the splatter screen keeps the heating element clean.
Always ensure that the splatter screen is fitted when cooking. If the splatter screen is not used,
oil will accumulate on the heating element, which may cause fumes.
Removing the splatter screen
Remove the splatter screen for cleaning after each use. First allow the splatter screen to cool
completely. Then, remove it by using your thumb to release the front clip by pushing the front
clip upwards and using your other hand to pull one of the tabs towards you. This will release
the splatter screen, allowing you to pull it out of the slot along the back of the lid.
Installation of the splatter screen
To install, gently push the splatter screen onto the back of the lid. Insert the rear tab and the
protector with the slot on the back. Then push the splatter screen upwards until it clicks into
the clip at the front.
The settings for the default programmes are shown below:
Function Icon
Chips
Dehydrate
Roast
Bake
desserts
Defrost
Time Temperature Time range
18 min 205 ºC
6 hrs. 70 ºC
25 min 205 ºC
15 min 175 ºC
10 min 205 ºC
Tempera-
ture range
1-60min 50-230 ºC
30min-24h 50-95 ºC
1-60min 50-220 ºC
1-60min 50-205 ºC
1min-60min 50-230 ºC
CECOFRY FIREDOME 8000 PRO
ENGLISH
Splatter
screen
Preheating
(open or
closed)
YES Off
Off
YES Off
YES Off
Off
47