ZKTeco ML200 Manual De Usuario página 6

3.2 Add the User Password in Standalone Mode
Press and hold the ZKTeco Button for
3 seconds
Verify the administrator's identity by
entering the password then pressing
the ZKTeco Button to confirm
Enter a six-digit password and press
the ZKTeco Button
Enter the same six-digit password
and press the ZKTeco Button again
Note:
The registered password must be six digits.
1)
2)
If you try to register the same password again, the lock will prompt one long beep
with a red light.
*Adding the Smart Gateway
4
Step 1
Plug the Gateway into the outlet using the provided Power Adapter.
Step 2
Open the ZSmart App. Tap the "+" button on the upper right corner, and then select the
"Smart Lock / Wireless Gateway" category.
Step 3
Follow the on-screen instructions to connect the Gateway to the 2.4GHz Wi-Fi network
and complete the setup.
Operation
Completed
Indicator's Status
2 short beeps with flashing blue light
1 short beep with green light, then
flashing green light
1 short beep with green light, then
flashing green light
1 short beep with green light
2 short beeps with no light indication
4