Intenso WPD10000 Manual De Instrucciones página 15

Fast charging:
To charge the Powerbank with a maximum power (18 watts), please use a power supply unit supporting
the Power Delivery Standard (PD). The fast charging is indicated by an LED as well which now lights up blue.
If the LED does not change from white to blue, your power supply unit or the cable used are incompatible
with the PD standard and the Powerbank will be charged normally.
b) Charging devices with the Powerbank
Wireless charging:
Activate the wireless charging function by pressing the On/Off button on the Powerbank. Now place your
Qi-capable device centrally across the wireless charging area. The charging process starts automatically. If
this is not the case, please check whether
• the Powerbank is adequately charged. For this purpose, at least one of the status LEDs must be per-
manently lit.
• a foreign body is located between the devices.
• your device is Qi-capable.
• where the correct position for wireless charging is located on your device. You may possibly have to
place it in another position.
The activated wireless charging process will be displayed by an orange LED.
The positioned device will be charged with a maximum of 10 watts. The amount of watt which are actually
transferred depends on the charged device. If another device is charged through a cable, the maximum
power will be reduced to 5 watts.
In order to end the charging process, you just have to remove your device from the Powerbank.
The ambient temperature level influences the charging speed, since the charging control of most mobile
devices reduces the power consumption when reaching higher temperatures.
Wired charging:
This Powerbank is equipped with two USB-A ports (USB-A 1 Out/USB-A 2 Out) and a port USB-C (USB-C
Out/In).
The two USB-A ports support the Qualcomm Quick Charge (QC) 3.0 standard (normal output: 5V-3A max.;
Output QC: 5V-3A, 9V-2A, 12V-1.5A = max. 18 Watt). The connection USB-C supports the Power Delivery
(PD) standard (normal output: 5V-3A max.; PD output: 5V-3A, 9V-2A, 12V-1.5A = max. 18 Watt) as well as
the above-described QC standard.
You can charge several devices at the same time with the Powerbank as well, for example a tablet on the
out port USB-A 1 and a smartphone on the Out/in port of USB-C or without wire through the Qi area. In this
case, please note that neither the QC nor the PD standard are available, but a maximum of 5V with a total
of maximum 15 watts (maximum 5 watts wireless) can be reached.
To charge your device, just connect the supplied cable to the connection USB-C (USB-C Out/ In) of the
Powerbank and the other end to the connection USB-C of the device to be charged.
In alternative, connect your own cable to the port USB-A (USB-A 1 Out/USB-A 2 Out) or the port USB-C
(USB-C Out/In) of the power bank and the other end to the device to be charged, according to the cable
type. The charging process starts automatically and the devices independently determine the respective
charging current. If the charging process does not start automatically, please activate the functional key.
The fast charging is indicated by an LED as well which now lights up blue. If the LED does not change from
white to blue, your connected device or the cable used are incompatible with the PD standard and the
power bank will be charged normally.
EN - Page 5 of 7