Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
KNOW YOUR EDGER
READ THE OWNER'S
MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
Edger. To familiarize
yourself with the location of the controls, compare the illustrations with
your Edger. Save this manual for future reference.
Clutch Lever
Control Rod
ENGINE
I_
Throttle
_I_
Choke
Starter
Handle
Blade Guard
VIEW OF BLADE AREA
Adjustable Rear Wheel
Adjustable
Front Wheel
Blade
Index Lever
Figure 6
Throttle
Control (if equipped) - Con-
trols the engine speed.
Clutch
Lever-
Use to start and stop the
blade and control the depth of cut.
Adjustable
Rear Wheel
- Right rear
wheel is adjustable to level the Edger when
edging along a curb (curb-hopping).
Adjustable
Front
Wheel
- Front wheel
is adjustable from side-to-side
for balance.
The front wheel can also be adjusted down
for curb-hopping.
Recoil
Starter
Handle
- The engine is
equipped with an easy pull recoil starter.
Blade
Guard
- Use to prevent stones or
other material from being thrown at the oper-
ator.
Index
Lever-
Permits adjustment from
the edging (vertical) position to the trimming
(horizontal)
position. To change position, pull
the index lever and rotate the quill assembly
to the desired angle or position.
EYE PROTECTION
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
F-021102L
10
,_
WARNING:
Debris thrown from
the Edger can result in foreign
objects being thrown into the
eyes, which can cause severe eye dam-
age. Always wear safety glasses or eye
shields when operating the Edger.
Publicidad
