Cembre MT-FC48N Manual De Uso Y Mantenimiento página 4

ENGLISH
3. MAINTENANCE
The tool is robust and requires very little daily maintenance.
Compliance with the following points should help to maintain the optimum performance of the tool.
3.1) Accurate cleaning
Dust, sand and dirt are a danger for any mechanical device.
Avoid placing the tool on muddy ground or dusty surface. After each day's use, the tool must be
wiped with a clean cloth, taking care to remove any residual particles. Always keep the advance
screw (15) and the moving parts lubricated with a few drops of oil.
3.2) Storage
When not in use, the tool should be stored and transported in the plastic case, to prevent damage.
Plastic case: VAL-P30; Size 315x300x95 mm; (12.4x11.8x3.7 in.) weight 0,93 kg (2 lbs).
The plastic case can accommodate the tool and accessories.
4. PART LIST
(Ref. to Fig. 4)
Code N°
Item
6580033 1* DIE POSITIONING PLATE
6580177 2 THREADED STUD TYPE "C"
6580178 2-1 THREADED STUD TYPE "B"
6580163 2-2 THREADED STUD TYPE "AB"
6340045 3 M5x10 GRUB SCREW
6340035 4 M5x6 GRUB SCREW
6620065 5 RAM
6402008 6 THRUST WASHER
6000328 7 WASHER
6340018 8 M4x6 GRUB SCREW
6380305 9 GRIP
6880065 10 HANDLE
6232001 11 TG.0350 WARNING LABEL
6740040 12 3/8" BALL
6900626 13 SCREW
The guarantee is void if parts used are not Cembre
original ones.
5. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certificate supplied by Cembre together with the tool or fill in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
DESCRIPTION Qty
Code N°
Item
1 6520569 14
1 6760752 15
1 6760100 16
1 6120045 17
6650118 18
3
1 6232640 19
1 6120050 20*
1 6250019 21*
2 6100027 22*
1 6900210 23*
2 6080106 24*
1 6640123 25*
6900296 26*
1
1 6900554 31
1 6900548 32
6860059 200* HEAD ASSEMBLY
When ordering spare parts always specify the following:
- code number of item
- description of item
- type of tool
- tool serial number
DESCRIPTION
SPRING
ADVANCE SCREW
SPLIT PIN D.3x16
INTERNAL CYLINDER
ø 2,5 x 3,5 RIVET
TG.0877 METAL LABEL
CYLINDER
SIDE
EXTRACTOR
M5x10 SCREW
CENTERING BUSH
NL6 NORD-LOCK WASHER
M6x25 SCREW
LOCKING SCREW TYPE "C"
LOCKING SCREW TYPE "B"
4
Qty
1
1
1
1
2
1
1
2
2
4
8
8
8
2
2
1