Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
Read all safety warnings and instructions. Failure to follow
the safety warnings and instructions can result in electric
shock, fire and / or serious injury.
Do not modify the engine to increase the speed, this
modification makes the vehicle illegal and may not comply
with traffic regulations. Any changes may affect the life and
integrity of the engine.
All unauthorized modifications will invalidate the guarantee.
Furthermore, a modified e-bike could lead to accidents for
which substantial compensation must be paid.
Accidental activation of the vehicle can cause injury (even
in the case of the push aid).
Walk mode may involve the rotation of the pedals, therefore
keep at a distance that does not interfere with them.
In order to minimise the causes that can create hazardous
situations for users and others, we encourage you to adopt
good rules of behaviour. Particularly when using the e-bike,
it is good practice to respect the following points:
•
consult your doctor before starting a training program;
•
observe the traffic regulations relating to pedal
assisted bicycles;
•
don't get distracted by looking at the display when you
are riding the bicycle;
•
do not use the display as a handle;
•
only use the HMI unit and the control panel supplied;
•
remove the battery before performing any type of
operation.
The drive unit does not require internal revision; therefore,
it must not be opened, except by authorized personnel in
the presence of defects. Unauthorized opening will void the
warranty.
The components mounted on the engine can be replaced
with identical material or approved as such.
It is necessary to remove the battery:
•
Before any intervention on the e-bike
•
During transport by car / plane
•
In case of conservation
User Manual - English – 2023
IMPORTANT:
The
manufacturer
responsibility for damage to persons or property
resulting from improper use of the equipment, from
errors in installation and use or from inexperience,
imprudence and negligence with respect to the
indications / instructions given in this manual.
IMPORTANT:
The
manufacturer
responsibility for damage to persons or property, as
well as to the defective operation of the unit if no
original spare parts and products recommended for
cleaning and maintenance are used.
CAUTION: In conditions of high use of the e-bike on
demanding routes, such as steep and prolonged
climbs at low speeds, the Drive Unit can reach
temperatures of over 60 ° C.
These depend on the ambient temperature, the
altitude of the route, the duration of the route and
the mode of assistance and weight in running order.
Do not touch the engine with hands and legs without
protection.
Identification of the
drive unit
The identification of the drive unit takes place through the
manufacturer's plate. The label shows the following data.
•
Model
•
Internal code OLI e-bike Systems
•
Serial Number
TYPE: BH / SH
CODE: EBAXXM3001
xxxxxxsxxxxx
IMPORTANT: The identification plate must never be
removed.
declines
all
declines
all
5
Publicidad
