ASSEMBLY AND CONNECTION
ASSEMBLY
Perform the assembly by fixing your Aidoo Z-Wave Plus close to the AC unit to be controlled
using the material supplied:
a.
Screw attachment.
b.
Double-sided adhesive attachment.
a.
CONNECTION
General considerations to connect the Aidoo Z-Wave Plus:
1.
Important: Some Aidoo Z-Wave Plus requires to be supplied by a limited power source
meeting class PS2 of the standard IEC 62368-1. Refer to the data sheet the for further
information.
Important: Use separate circuits for the unit that is to be controlled and the power supply to
2.
the system.
3.
Disconnect the indoor unit. Perform all of the connections with a total absence of power.
4.
Connect the Aidoo Z-Wave Plus to the indoor unit according to the instructions detailed in
the data sheet of your specific Aidoo Z-Wave Plus reference.
5.
Power the indoor unit. Check the LEDs (see Self-diagnosis section).
Configure the device.
6.
b.
EN
7