Publicidad
Idiomas disponibles
Idiomas disponibles
SANDING (FIG 8)
With sanding accessories (not included), this tool is a detail sander.
It is suitable for dry sanding of wood, plastic, and metal surfaces,
especially in corners, edges and hard to reach areas. See FIG 8.
Tips:
1. Work with the complete surface of the sandpaper, not only with
the tip.
2. Sand with continuous motion and light pressure. Do not apply
excessive pressure. Let tool do the work.
3. Always secure small work pieces.
4. Select suitable abrasive paper for best results.
SCRAPING (FIG 9)
Scraper blades (not included) are suitable for removing vinyl,
varnish, paint layers, carpeting, caulk and other adhesives.
use a rigid scraper blade to remove harder materials, such as vinyl
flooring, carpeting and tile adhesives in a large area.
use a flexible scraper blade (not included) to remove softer material
such as caulk.
Tips:
1. When removing strong, tacky adhesive, grease the scraper
blade surface to reduce gumming up.
2. Begin with light pressure. The oscillating motion of accessory
only occurs when pressure is applied to the material to be
removed.
3. If you are removing caulk from a delicate surface, such as a
bath tub or tile back splash, we recommend taping to protect
the surface that the blade will rest on.
GROUT REMOVAL (FIG 10)
use a grout removal blade (not included) to remove damaged or
cracked grout, or in order to replace a damaged or broken tile.
To remove the grout, use a back and forth motion, making several
passes along the grout line. Be careful not to apply too much side
pressure on the grout blade. See FIG 10.
ACCESSORIES
Recommended oscillating tool accessories for this tool are the GENESIS™ oscillating
tool accessories. Please refer to "Genesis Oscillating Tool Accessory Reference Guide"
sheet enclosed for details.
FIG 7
FIG 9
FIG 10
FIG 8
11
Publicidad
