Publicidad
READ THE INSTRUCTIONS:
Important Safety Tips
SAFETY PRECAUTIONS
When using an electrical appliance, basic safety precautions, including the following, should always
be followed. *. Domestic use only. Do not use it for commercial purposes. * Before the first connection
of the device check that the voltage indicated on the label corresponds to the mains voltage in your
home. * To avoid fires, electric shocks and injuries do not immerse the cable or the device in water or
other liquid. * Keep away from children. * Unplug the coffee grinder from the outlet when not in use
and before cleaning. * Do not use the device if the cable or plug is damaged or if a malfunction is
detected if it has happened. * Do not use outdoors. * Do not allow the cable to hang over the edge of
the table or counter or touch hot surfaces.* Do not touch any moving parts. * To disconnect the unit
from the power supply never pull the cable, do not use the plug.* To prevent overheating of the motor,
do not use the grinder for more than 30 seconds. *If you detect a malfunction please refer it to an
authorized technical service center. Repair the appliance only by qualified persons. * If the power
cord is damaged, it must be replaced by the manufacturer, its service agent or by qualified personnel
in order to avoid a hazard. * This device can be used by children 8 years of age or older and people
with physical, sensory or mental disabilities or lack of experience and knowledge, if they have been
given proper supervision or instructions on the use of the device safely and understand the dangers
involved. * Children they must be monitored to ensure that they do not play with the device.
* Children should not play with the device. The cleaning and maintenance to be performed by the
user * Must not be performed by children unless they are over 8 years of age and are under super-
vision. * Keep the device and its cable out of reach of children. * DO NOT add water or other liquid
to the grinder * Never immerse the power cord and the base of the product in water or other liquid
and do not wash the appliance in the dishwasher. * The blades are sharp, do not touch them to
avoid harming yourself. * Always disconnect the device from the network if it is left unattended and
before mounting, disassembling or cleaning. * Do not use this device with a programmer, counter
or other device that can start the device automatically because it is dangerous. * Never remove the
transparent cap before the blades have stopped spinning.
GRINDER PARTS
1. Motor part with grinding area
2. Transparent lid
3. On/Off switch
4. Blade
Grind the coffee
Be careful not to overload the grinder. Do not fill the coffee beans beyond the edge of the unit. To
moner the coffee grinder running, place the transparent lid on the part of the motor and press the
on/off switch. To stop it, just release the switch on/off.
It is recommended not to continue grinding for more than 30 seconds. A longer operation does not
it results in a finer grind, but simply overheats the coffee, resulting in the loss of aroma. You will
soon find the desired consistency of routine.
After grinding your coffee, remove the clear lid from the engine part and pour the coffee grounds.
For accuracy, use calibrations on the side of the transparent cover. Note: For optimal flavors, it is
recommended to grind the coffee beans immediately before the coffee is made for drinking.
CLEANING
Always disconnect the drive before cleaning. The transparent lid can be washed by hand; not
clean in the dishwasher. The grinding area on the engine part should be cleaned with a brush
small. Clean the engine part only with a damp cloth Always disconnect the drive before cleaning.
The transparent lid can be washed by hand; not clean in the dishwasher. The grinding area on the
engine part should be cleaned with a brush small. Clean the engine part only with a damp cloth
10
ANTES DE SU PRIMER USO.
1. Saque el aparato de su embalaje y compruebe que lleve todos los accesorios.
2. Limpie todas las partes desmontable con un paño seco.
USO DEL APARATO.
1. Enchufe el aparato a la red eléctrica.
2. Introduzca granos de café o el producto a moler en la cavidad de molido (máximo 50 gr.), cierre la
tapa hasta que oiga el click del cierre de seguridad, pulse el interruptor, el grado de molido depende
del tiempo que mantenga pulsado el interruptor, contrólelo a través de la tapa transparente hasta que
sea de su agrado. El tiempo normal de molido es de entre 20 y 30 segundos.
3. Suelte el interruptor cuando alcance el grado de molido deseado, extraiga el producto molido y lim-
pie posteriormente el aparato.
4. En este molinillo puede moler, café, y alimentos secos, como especias (judías, pimienta, etc).
NOTAS:
A. Este aparato es para molder alimentos secos, por favor no lo utilice con alimentos húmedos.
B. Asegurese antes de pulsar el interruptor de que la tapa esté correctamente cerrada, sino el apa-
rato no funcionará.
C. Cuando el aparato esté en marcha no quite la tapa.D. Suelte el interruptor antes de desenchufar
el aparato.
E. No introduzca mas de 50 gramos de café o alimentos en el aparato, podría dañar las partes plás-
ticas.
F. No use el aparato mas de 30 segundos ininterrumpidamente, si necesita volver a usarlo, deje una
pausa de enfriamento de 60 segundos.
G. Si va a moler alimentos grandes córtelos en trozos de 10 mm. Máximo, si no podría romper el
aparato.
H. Si la cuchilla se atasca apague el aparato y desenchúfelo de la red eléctrica antes de manipularlo.
LIMPIEZA Y MANTENIMIENTO
Antes de limpiar el aparato desenchúfelo de la red eléctrica y espere a que la cuchilla deje de girar.
Despues de moder guarde el cable en su compartimento y limpie el recipiente de molido con un
cepillo o similar, no lo limpie con agua. Limpie el cuerpo con un paño suave y seco.toma de corriente.
Nunca sumerja el cable de corriente y la base del producto en agua u otro líquido. No utilice produ-
ctos químicos para lavar el aparatoLimpie la taza exterior y moledora con un paño húmedo.*Des-
pués de lavar la cubierta de moler secar con un paño seco.* Cuando limpie el aparato, no ponerse
en contacto con la hoja afilada, para evitar hacerse daño.
Problema
Causa
No funciona
No está enchufado
No funciona
La tapa no esta bien cerrada
No funciona
No ha presionado el interruptor
Problemas Técnicos
No funciona
La cuchilla gira muy lentamente
Exceso de alimentos
o no gira
Hay restos de alimentos en
Mal Olor
el aparato
NOTA: CUALQUIER DEFECTO DEL APARATO DEBIDO A UN MAL USO O MANTENIMIENTO
POR PARTE DEL CONSUMIDOR, NO ENTRARÁ DENTRO DEL PERIODO DE
GARANTIA DADA POR EL FABRICANTE O IMPORTADOR.
Solucion
Enchufelo Nuevamente
Cierrela correctamente hasta oir click
Púlselo para iniciar el molido
Dirijase al SAT
Retire el alimento sobrante
Retire el resto de alimentos y
limpielos
3
Publicidad
