Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE FIRST USE
1. Remove all packaging material.
2. Clean the kettle by filling with clean water and bringing to the boil (see "Operation").
3. Pour away the water then repeat the operation.
OPERATION
1. Wind out the mains cord only as much as necessary. Draw it out through the opening in the base and connect
it to a suitable mains socket. Place the base on a flat surface.
2. Open the lid by pressing the lid release button and pour in the desired quantity of water. While doing so,
watch the water level mark inside the appliance. Never go below the
minimum (MIN) or above the maximum (MAX) marks.
3. Close the lid by pressing the cover down and ensure that the kettle is switched off before setting it on the
base.Remember to cover the lid tightly,otherwise it will not cut off the electricity automatically even after the
water has boiled.
4. Press the switch down to the position "I". The appliance will begin to operate, and the indicator light will come on.
5. When the water boils, the appliance will switch off automatically and the indicator light will go off.
6. You can pour the water out without opening the lid.
7. If you wish to stop the boiling process or interrupt it temporarily, switch the appliance off by pushing the switch
upwards to the position "O", before removing the kettle from its base.
NOTE
This appliance comes with a safety device
which automatically switches off the heater
element if the applicance is inadvertently
switched when empty, or if it boils dry.
In this case, let the applicance cool down
completely, before filling with water again.
CLEANING AND CARE
Please also observe the safety advice
for this.
1. Always remove the plug from the mains
socket before cleaning the base. Let the
kettle
cool down completely.
2. Clean the outside of the kettle and the
base with a soft damp cloth. Do not use
scouring materials.
3. Descale at regular intervals. Use a des-
caling agent, which can be obtained from
specialist shops, and follow the instructi-
ons given.
4. Don't use any metal object or hard object
to clean the heater otherwise it will be
scraped.
TECHNICAL DATA
Operating voltage : 220-240V~ 50/60Hz
Power consumption : 1850-2200 W
BH-9324-33 IM-GB, HU, CZ, ES, FR, GR, NL, PL, RO, RU, BG, PT, SK, SRB, LT.indd 3
BH-9324-33 IM-GB, HU, CZ, ES, FR, GR, NL, PL, RO, RU, BG, PT, SK, SRB, LT.indd 3
FUNCTION MANUAL
1. Basic operation:
Press the
key shortly, with a sound, it
starts running with green indicator. After
the water boils, the indicator change to red
color and the buzzer sends out a sound at
the same time.
Note: The knob light will be off 5 minutes after water boiled
2. Function of keep warm:
Press the
for 3 seconds, with the buzzer sends out a
sound, it starts running the function of keep warm with the
green indicator light flashes. The display will show when
the kettle is in keep warm function.
Turn the
for keeping warm at
40 °C/50 °C/60 °C/70 °C/80 °C/90 °C/100 °C.
Note: The keep warm function will be off itself after 2 hours
without any operation
3. Function of temperature setting:
Press the
key shortly, with a sound, it starts running with
the green indicator.
Turn the
for setting the temperature at
40 °C/50 °C/60 °C/70 °C/80 °C/90 °C/100 °C.
After the water reach the required temperature, the indicator
change to red color and the buzzer sends out a double
sound at the same time.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to
an appropriate waste disposal centre
GB
2020. 11. 24. 15:14:11
2020. 11. 24. 15:14:11
Publicidad
