Publicidad
Idiomas disponibles
Idiomas disponibles
7. LOADING THE RIBBON
7. LOADING THE RIBBON
1. Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing,
2. To avoid injury, be careful not to catch or jam your fingers while opening
There are two types of media available for printing on, these are standard media and direct thermal media
(a chemically treated surface). DO NOT LOAD a ribbon when using a direct thermal media.
1. Turn the power off and open both the top cover and the right side cover.
2. Set the head lever to the "OPEN" position and release the head lock plate.
Head Lever
Head Lever Position
1:
2:
OPEN: Ribbon/media replacement
3. As Fig. 7-2 shows, unroll and loosen the ribbon a little.
4. Insert the ribbon under the print block so that the ribbon supply end is positioned backside of the
printer.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
etc., be drawn into the moving parts, push the switch in the "OFF" position to
stop movement.
or closing the cover.
Top Cover
OPEN
1
2
Labels or thin tag paper
Thick tag paper
WARNING!
Right Side Cover
Head Lock Plate
Ribbon
Ribbon Core
E7-1
ENGLISH VERSION EO1-33016
7. LOADING THE RIBBON
Fig. 7-1
Fig. 7-2
Publicidad
Capítulos
