Pop Mode; Red Light Camera Point Delete; Red Light Camera Quiet Ride - Uniden R4BLK Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

confirm. You can also delete Mute Memory points from the Delete All Mute? menu
when GPS is on.

POP MODE

In POP mode, the R4BLK can detect short burst from radars that are too fast for
many other detectors to catch. You can turn POP mode on and off in the Expert
menus.
QUIET RIDE
(GPS On)
This function mutes X and K band radar alarms when you drive under a speed limit
set in this menu (up to 90 mph/140 km/h). If X or K band signals are detected, the
unit beeps once in volume level one and then goes to volume level zero. Q-Ride
flashes in green on the OLED.
Ka and Laser bands are NOT muted. Mute Memory overrides Quiet Ride.
45
mph

RED LIGHT CAMERA POINT DELETE

Expert level only
When you are at a red light camera and an alert displays, you can delete that camera
point. Once deleted, the R4BLK will not alert at that red light camera location again.
To delete the RLC Point, press MUTE/DIM on the unit or MUTE on the power cord
while the alert displays.
A confirmation message displays. Press MUTE/DIM on the unit again or MUTE again
on the power cord. Delete Completed displays.

RED LIGHT CAMERA QUIET RIDE

This function mutes red light camera alarms when you travel below a speed set in
the RLC QR menu (page 16).
5 8
mph
K
24.120
Q-Ride
- 34 -
270 ft

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido