Descargar Imprimir esta página

Mayfair 19717001 Instrucciones De Instalación página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instructions
Installation Directions
NOTE:
Ensure power to the circuit you are working on has been switched OFF before commencing any
electrical work.
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.
2. Remove the hanger bracket (D) from the shade (H).by loosening the grub screws (F) on sides with Allen key (G).
3. Remove the mounting bracket (A) from the hanger bracket (D) by loosening the screws (E).
4. Pass the power supply wires from the ceiling outlet box (Not included) through the center of the ceiling mounting
bracket (A). Install the mounting bracket (A) on the outlet box with the mounting screws (B).
5. Connect the household ground wire to the luminaire ground wire by wire nut (C), connect the power supply wires
to the wires of luminaire by wire nuts (C). Ensure that the wires are secure, and no bare wires are exposed.
6. Install mounting bracket (A) back on the hanger bracket (D) and secure it by tightening the screws (E).
7. Install the shade (H) back on the hanger bracket (D) and secure it by tightening the grub screws (F) on the sides
with Allen key (G).
8. After the installation is complete, switch on the luminaire to test and enjoy your new lighting product.
9. To operate the colour shifting function, use the wall switch.
While the luminaire is on, toggle the wall switch OFF and ON again within 3 seconds.
The colour shifting sequence will jump from 3000K → 5000K → 4000K.
For the colour shifting to memorise the colour temperature, leave the wall switch OFF for over 7 seconds.
To reset the colour shifting, toggle the wall switch OFF and ON twice within 1 second.
NOTE: The colour shifting function will only operate with a mechanical or relay ON/OFF switch.
The colour shifting function will not operate with a semi-conductor ON/OFF switch.
2 | P a g e
For customer support, please contact:
Tel: +1 (949) 800 8488
Email:
support@beaconlighting.us
www.beaconlighting.us
v 1 . 0 ( 1 2 / 2 0 2 3 )

Publicidad

loading