SOLAC TE7803 Instrucciones De Uso página 16

Keep the appliance in a dry, dust-
•
free place, out of direct sunlight.
Use the appliance, its acces-
•
sories and tools in accordance
with these instructions. Take
working conditions and job to be
carried out into consideration.
Using the appliance for anything
other than its intended use can
create hazards.
Use the device only with the ba-
•
tteries for which has been speci-
fically designed. The use of any
other battery/ies s can cause an
explosion or fire hazard.
SERVICE:
The appliance has been verified
•
and designed for a long useful
life as is described in detail in the
guarantee sheet included with
the product, provided that it is
used in domestic, non-professio-
nal conditions.
We recommend checking that
•
the appliance is functioning co-
rrectly after approximately 10000
measurements and after any re-
pair work. Take the appliance to
an authorised Technical Support
Service.
Make sure that the appliance is
•
serviced only by specialist per-
sonnel, and that only original
spare parts or accessories are
used to replace existing parts/
accessories.
Any misuse or failure to follow
•
the instructions for use renders
the guarantee and the manufac-
turer's liability null and void.
ASSEMBLING THE BAT-
TERY/IES
Caution: During the handling of
•
batteries, do not touch both po-
les at the same time, as this will
provoke the partial discharge of
the stocked energy therefore
affecting longevity.
Remove the cover of the battery
•
compartment.
Check that the plastic covering
•
that protects the battery has
been removed (some batteries
are sold with a protective cove-
ring).
Put the battery in its compart-
•
ment, respecting the polarity
(Fig. 1).
Close the cover of the battery
•
compartment.
It is essential that the batteries
•
should always be the same kind
and the same charge. Never mix
alkaline batteries with normal
one (Carbon-Zinc) and/ or re-
chargeable ones.
If the low battery symbol Lo+
•
is displayed, remaining power is
low, replace with new batteries.
EN