Velleman etiampro LQS02 Manual Del Usuario página 5

3. General Guidelines
Refer to the Velleman Group NV® Service and Quality Warranty
on the last pages of this manual.
Familiarise yourself with the functions of the device before
•
actually using it.
All modifications of the device are forbidden.
•
Only use the device for its intended purpose. Using the device
•
in an unauthorised way will void the warranty.
4. Features and specifications
• This compact door sensor will automatically switch on LED lighting
in your cabinets or dressing room. Simply mount this surface
mount sensor in the closet. You can easily conceal the electronic
control module in a false wall.
• This Sensor ensures that your LED strip automatically turns off
when the cabinet door is closed and immediately turns on when
the door is opened. Save energy and enjoy convenient lighting in
your cabinets. See image on page 2
• suitable for: 12 and 24V LED strips
5. Installation
Determine the Mounting Location:
Determine the location where the door sensor should be placed.
Generally, it is optimal if the sensor is at a height where it can
properly reflect the infrared signal when the door is closed.
Surface mounting:
Mount the sensor in the cabinet with the screws provided. Then
connect the connection cable to the switch module.
Mount the LED Strip:
Mount the LED Strip on the inside of the cabinet in an aluminum
profile.
V. 01 – 15/11/2023
LQS02
5 ©Velleman Group nv