Connection Instruction; User Manual - PNI -PC-DVR Guia Del Usuario

ACC power cable for PNI dashcam

Connection instruction

1. With the help of a voltage test pencil,
identify the ACC output on your car's
dashboard. There must be no current
on this output when the engine is off. It
must be current only when the engine
is running.
2. Connect the red wire (marked with
ACC) to the ACC output of your car.
3. Identify the location of the 12V fuse in
the fuse box of your car and connect
the yellow wire (marked with BAT +) to
that location.
4. Connect the black wire (marked with
GND) to a metal surface (a screw, for
example).
5. After connecting the 3 wires, connect
the USB-C connector to the dashcam.
English - 3