CONGA Powerbag 2000 Compact Manual De Instrucciones página 37

3. OPERATION
Please note
- Once the accessories are mounted, unwind the cable enough to plug it into the socket.
- A yellow mark on the power cable marks the ideal length. Do not unwind the power beyond
the red mark.
- Connect the power cord into a socket.
- Press the power button to turn the vacuum cleaner on.
- To rewind the power cord, press the cable-rewinding button with one hand and hold the
power cord with the other to avoid damage or injury resulting from a whipping effect. The
yellow mark on the power cord indicates that it is close to the cord limit. Do not pull the
cord beyond the red mark.
Important
The appliance motor is equipped with a safety thermostat. If for any reason the vacuum
cleaner overheats, the thermostat will automatically switch off the appliance. If this happens,
switch off the vacuum cleaner and unplug it from the socket. Remove and empty the dust tank
and clean the filter. Allow the appliance to cool down for about an hour. To restart it, plug it
back into the socket and switch it on.
Installing the hose
- Insert the hose into the connector. To do this, align both parts and insert the hose by
pressing until it snaps into the correct position.
- Remove the plug from the outlet. To remove the hose, press firmly on the tabs on both
sides of the connector.
Dismantling of extension tubes and accessories
To remove the accessories, pull them firmly.
4. CLEANING AND MAINTENANCE
Cleaning the dust tank. Fig. 2
- Open the dust tank cover.
- Remove the paper bag (paper bags cannot be reused).
- Close the lid. Paper dirt bags cannot be reused.
Maintenance
- To clean or replace the air outlet filter, first remove the grille by pulling it firmly out of the
appliance.
CONGA POWERBAG 2000 COMPACT
ENGLISH
37