Publicidad
Idiomas disponibles
Idiomas disponibles
Preset light control with 4 dimmer times to simulate daylight
Point
Time
Light Intensity
1
08:00
000 %
2
11:00
100 %
3
18:00
100 %
4
22:00
000 %
5
6
7
8
After pressing
to confirm the selected channel the number of dimmer points will be shown. Use the
times to 8 dimmer points (e.g. to simulate moonlight). Press
times can be programmed with the navigation keys
, ,
and
Select
Simul. The moon phase simulation
Moon
can be activated or disabled with the
configuration. The Ocean Lux LED Controller will then return to display / control mode.
Example of programming 8 dimmer points to simulate daylight with moon phases:
Point
Time
Light Intensity
1
08:00
000 %
2
11:00
90 %
3
14:00
100 %
4
18:00
90 %
5
22:00
000 %
6
23:00
000 %
7
03:00
20 %
8
07:00
000 %
Manuelle Beleuchtung
This menu item is only used to check or diagnose individual channels. After opening the menu item the current brightness of all individual channels
for control mode will be shown in percent. Use
and
to select the individual channels C1 – C4 and then adjust the brightness in percent with
the
oder
keys. Pressing the
Escape key will exit the program and the Ocean Lux LED Controller returns to display / control mode.
Your changes will not be saved.
Moon
Moon
If menu item
is activated, this menu item will show the period the moon phase simulation is programmed for. The period for the moon phase
simulation programmed here should be identical to the programmed moon phase simulation, such as the configuration with 8 dimmer times for day-
light with moon phase simulation from 23:00 hours – 07:00 hours. The Ocean Lux LED Controller uses the date and the resulting natural moon phase
to calculate the actual brightness of the programmed moon phase simulation. Meaning, during a full moon (natural moonlight brightness of 100%)
the moonlight brightness of the programmed channel will have a programmed brightness of 20%. If the natural moonlight brightness is only 50%,
the programmed channel brightness will synchronise to 10%. So the programmed moon phase simulation adapts to a natural moon phase. An icon of
the natural moon phase is shown in the display. Under
Simulation
phase simulation, press
to confirm, then set the end time for the moon phase simulation under item
select
yes
or
no
to save the configuration. The Ocean Lux LED Controller will return to display / control mode.
Time lapse
Use menu item Time lapse to review the daylight and moon phases programmed for a specific period. Press the
(select time) and
Time lapse A
(duration of the simulated time, default 120 s). Under
time you wish to check. Under
Time lapse
A, use the navigation keys , ,
default 120 s). The setting in seconds is the duration for a 24 hour simulation. After pressing the
return to display / control mode.
Extras
Menu item Extras contains the model and software version as well as display and language settings. Menu item
the current software version, website and model, or press
to navigate. If no keys are pressed for 20 seconds, the Ocean Lux LED Controller will
automatically return to display / control mode.
Dohse Aquaristik GmbH & Co. KG · Otto-Hahn-Str. 9 · D-53501 Gelsdorf
10
100 %
50 %
10 %
7:00
10:00
13:00
16:00
19:00
22:00
or
keys to increase the number of dimmer
to confirm the individual dimmer times. The time and brightness of the individual dimmer
. After programming the individual dimmer times, press
or
keys. Select
yes
or
no
and press
100 %
50 %
10 %
7:00
10:00
13:00
16:00
19:00
22:00
01:00
Start, use the navigation keys , ,
and
to set the start time for the moon
Simulation
End. In the next item
button to select
Time lapse
M, use navigation keys , ,
and
to set the time lapse speed (duration of the simulated time,
Escape key the Ocean Lux LED Controller will
Info & Support
Display
Here you can configure all values to appear in the display (display mode). When configured to several values, the display will toggle between these.
Press
to open menu item
in the display. The default is 5 seconds. Press
1 – 4 to show in the display. Press
With the
Moonphase
activated this will later be displayed in percent.
You can then press
to adjust the daytime
and
. In the next menu items
dimmed display at night. In the final time
display / control mode.
Language
The default language setting of the Ocean Lux LED Controller is English. Press
to choose between German, English,
The Ocean Lux LED Controller will return to display / control mode.
to open menu item
System
to confirm the
Under the additional menu item
will be reset and the Ocean Lux LED Controller will then return to display / control mode.
Ocean Lux LED Controller
Grazie per aver scelto di acquistare il nostro DuplaMarin Ocean Lux LED Controller. Le presenti istruzioni per l'uso sono parte integrante del
prodotto. Contengono importanti indicazioni sull'attivazione e sull'utilizzo del prodotto. Conservare queste istruzioni per l'uso per future consultazioni.
Contenuto della confezione:
1 x Ocean Lux LED Controller
1 x Cavo di collegamento VG Ocean Lux 80 W su Ocean Lux LED Controller
1 x Cavo di collegamento per PC
1 x Manuale di istruzioni per l'uso
04:00
07:00
Ocean Lux
LED Controller
Collegamenti con Ocean Lux LED Controller
1. Entrata canale Ocean Lux LED 1 + 2
2. Entrata canale Ocean Lux LED 3 + 4
3. Presa LED per lampade LED Ocean Lux
4. Presa LED per lampade LED Ocean Lux
5. Presa USB per PC
6. Alimentatore Ocean Lux LED da 80 W
Save
now,
7. Cavo di collegamento*
8. Cavo di collegamento a Y (art. n°: 81500
facoltativo e disponibile su richiesta)
9. Ocean Lux LED Controller
Time lapse M
10. Cavo di collegamento a PC*
and
to set the
* contenuto della confezione dell'Ocean Lux LED Controller
Come collegare una lampada LED Ocean Lux
Collegare:
1. la lampada LED Ocean Lux con la presa LED
2. il cavo di collegamento
scrolls through
(per es. alimentatore VG Ocean Lux da 80 W).
6.
3. l'alimentatore
con la presa di corrente.
+49 (0)22 25 - 94 15 0 · info@ dohse-aquaristik.de · www.dupla-marin.com
Display
durati. where you can use the navigation keys , ,
Select channels
again to open menu item
again to open menu item
Select
miscella. and configure whether to show the moon phase in the display.
Display day
and night time
Display night
display brightness in percent using navigation keys , ,
Display night Start
and
Display night End
use the navigation keys , ,
Save
now?, select
yes
no
or
to save the configuration. The Ocean Lux LED Controller will return to
under menu item
French
and Spanish. In the next item
Save
now, select
Factory
sett. you can press
to restore the factory settings
Cavo di collegamento
Cavo di collegamento per PC
1.
2.
7.
8.
6.
3.
9.
dell' Ocean Lux LED Controller
.
7.
1.
9.
con l'entrata
dell'Ocean Lux LED Controller
e il corrispettivo alimentatore
and
to configure how long the values will appear
and use the navigation keys
and
to select channels
and
to set the duration for the
Language
and use the navigation keys
and
yes
no
or
to save the configuration.
Factory set. now?
and selecting
yes
or no. All settings
Manuale di istruzioni per l'uso
PC
3.
4.
5.
9.
10.
4.
3.
6.
11
Publicidad
