Publicidad
Idiomas disponibles
Idiomas disponibles
- CAUTION! Avoid physical contact with the cutting blades while
emptying and cleaning the device as they are very sharp and
might cause serious injures.
- CAUTION! Do not exceed the permissible operating time
stated on the nameplate. Wait for the device to cool down
before turning it on again.
DEVICE DESCRIPTION
1.
Blender housing
2.
Control buttons
A.
ON/OFF
B.
Turbo
C.
Speed control knob
3.
Hanging bracket
4.
Mixing attachment
5.
Blending container (700 ml)
ATTENTION! The whipping attachment (6), the shredding set (7) and the mixing container (5) are
included in the MBL-34M version only.
BLENDER ASSEMBLY AND USE
CAUTION! Do not allow the blender housing (1) to get wet. Prior to the accessories mounting/
demounting procedure, make sure the device is not connected to the power supply.
CAUTION! The temperature of food prepared with the blender must not exceed 60°C.
The MBL-33M (34M) version of the blender is a compact device facilitating everyday meal
preparation. The device is especially recommended for grinding raw and cooked vegetables,
soft fruits (without seeds), preparing sauces, creams, soups, mixing liquids, etc. Prior to grind-
ing large ingredients with a blender cut them into smaller pieces (1-2 cm).
1. Attach one of the selected accessories to the blender housing (1): a mixing attachment (4), a whip-
ping attachment (6) or a chopping set (7). To lock the accessories, turn the housing against the
attachment clockwise until it locks. Do the opposite for disassembling the mixing attachment. Pay
close attention in order to avoid self injures or parts damages when disconnecting accessories.
Shredding kit (7) - preparation for work.
Place the container (F) on a dry and stable surface. When holding the plastic shaft, place
the knife (E) into the container by putting it on the plastic shaft. Place food items (vege-
tables, fruits, nuts, meat, onions, hard cheese, hard-boiled eggs, garlic, herbs) inside the
container. Put on the top cover (D) and turn it slightly clockwise to lock it.
2. After ensuring proper assemble of all components, connect the plug of the device to the power
source.
3. To start blender:
• Set the speed using the control knob (C) (speed range: 1-9), then press and hold the ON/OFF
button (A).
• Press and hold the Turbo button (B) for short-term operation of the device at maximum speed.
4. After the work is finished, turn the control knob to the lowest speed and disconnect the device
from the power source.
6.
Whipping attachment for egg whites,
light creams and sauces
7.
Shredding kit
D.
Container lid
E.
Chopping knife with a stainless
steel blade
F.
Container for grinding (500 ml)
EN
17
Publicidad
