Note:
Used to give more information that is necessary in a given
situation.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
instructions. Failure to obey the warnings and instructions
may result in electrical shock, fire and/or serious injury.
Note:
Save all warnings and instructions.
•
Only use the battery chargers, QC330 or QC500 to charge Husqvarna
original batteries. The batteries are software encrypted.
•
Use the 40-B140X, 40-B220X, 40-B330X batteries that are
rechargeable as a power supply for the related Husqvarna products
only. To prevent injury, do not use the battery as a power supply for
other devices.
•
Do not try to disassemble or repair the battery. All repairs is to be done
by an approved dealer only.
•
Keep the battery away from sunlight, heat or open flame. The battery
can cause burns and/or chemical burns.
•
Do not use a defective or damaged battery or battery charger.
•
Do not cause mechanical shock to the battery.
•
Keep the battery away from children.
•
Keep the battery clean and dry.
•
Clean the battery terminals with a clean dry cloth if they become dirty.
•
Do not keep the battery in the battery charger when it is fully charged.
4
Read all safety warnings and all
•
Remove the battery from the product when you do not use it and during
transportation.
•
Keep batteries in storage away from metal objects such as nails, screws
or jewelry.
OPERATION
•
Push the battery indicator button to start the battery before use.
•
The battery must be charged before you use it for the first time. Always
use HusqvarnaQC330 or QC500 battery charger.
•
Use the battery only when the ambient temperature is between -10°C
(14°F) and 40°C (104°F).
•
Decrease the workload and/or speed when the battery temperature
indicator is flashing.
Note:
Heavy workload when the battery temperature is less than
0°C (32°F) can cause a temporary battery error.
•
Use the battery charger only when the ambient temperature is between
5°C (41°F) and 40°C (104°F).
•
The battery will not charge if the battery temperature is more than 50°C
(122°F).
•
Push the battery indicator button to get information of the state of
charge of the battery.
Husqvarna Fleet Services
™
Husqvarna Fleet Services
is a cloud solution that gives the commercial
fleet manager an overview of all products. Husqvarna Fleet Services
available as a web service and as an app. For more information about
™
Husqvarna Fleet Services
, refer to www.husqvarna.com.
™
™
2046 - 002 - 29.01.2024
is