Publicidad
Idiomas disponibles
Idiomas disponibles
Weighing
Positioning the scales
1. Place the scales on an even, firm, and dry surface. Do not place the scales on carpet.
2. First, briefly step onto the middle of the weighing surface to calibrate the scale.
As soon as the display shows "0.0", calibration is complete. This calibration must be
performed after each battery change.
Weighing
WARNING against injuries
− Do not step onto the scales with wet feet or when its surface is damp.
Risk of slipping!
1. Step once with a little force on the weighing surface (tap-on function).
In the illuminated display "0.0", as well as the set measuring unit e.g. "kg", is shown.
2. Position yourself on the scales. Remain standing still and do not hold on to
anything.
The measured weight will be displayed shortly thereafter.
A few seconds after you step off the weighing surface, the scales will switch off
automatically.
‚ Weigh yourself with as little clothing on as possible.
‚ Try to weigh yourself always at the same time and under consistent
conditions in order to obtain comparable values.
Resetting the scales
Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the battery from the battery compartment and wait a moment.
2. Re-insert the battery. Pay attention to the correct polarity of the batteries (+/-). The
plus pole (+) must point upwards.
After switching the scales on, you can weigh yourself as usual.
18
Bathroom Scales BE 2306-x
Publicidad
