Byox B67 Manual página 9

35.You must teach your child to always ride the tricycle only forwards, in the direction of movement, without turning back,
while in motion.
36.The child must not jump with the tricycle from curbs or other higher parts, as well as bumping into them.
37.Do not use the tricycle in rainy days.
38.The use of the tricycle in rainy/ wet weather may lead to damages or rust to the product. Keep the product away from
water.
PARTS OF THE TRICYCLE
Before assembly of the tricycle, take all the parts out of the packing and check if all of the bellow listed are present. Keep the
packages until you finish the assembly completely. SEE FIGURE PD: 1. Handlebar; 2. Safety board; 3. Parent control
handle; 4. Foot rest for younger children; 5. Rear wheels; 6. Cup/ Bottle holder; 7. Front wheel; 8. Frame of the tricycle; 9.
Bag; 10. Canopy; 11. Seat; 12. Footrest for older children; 13. Handlebar grip; 14. Safety belts; 15. Pedals.
ASSEMBLY STEPS
1.Step 1 – See Figure 1: Промушете оста на задните гуми в съответния отвор в задната част на рамката на
триколката. Натиснете внимателно. Трябва да чуете звук на щракване, показващ, че задните гуми са се фиксирали
към рамката. Thread the axles of the rear wheels in the corresponding openings in the rear part of the frame of the tricycle.
Press forward carefully.you should hear a click sound showing that the wheels are fixed to the frame.
2.Step 2 – See Figures 2 and 3: Slide the front fork in the opening in the frame. Be careful how the mudguard is pointed.
Put the handlebar on top of the front fork and push down. You will hear a click sound showing the successful fix of the two
parts to each other. Rotate the handlebar to the left and right to check if the assembly is successful. If the handlebar controls
the front fork and the fork does not fall out of the frame, then you have assembled the parts correctly.
3.Step 3 – See Figures 4 and 5: Place the seat on the base for it situated on the tricycle's frame. Align these 2 parts so that
the openings on the seat and base for the set screws match. Insert the screws through the openings and rotate them to fix
the seat. You will need 4 screws. Place the footrest for younger children on the frame in front of the seat. Align the openings
on the footrest and frame of the tricycles. Insert the set screw through them and rotate it to fix the footrest to the frame.
4.Step 4 – See Figures 6 and 7: Fix both of the parts of the safety board to the supports on each side of the seat (Figure 6).
Slide one of the parts of the safety board through the opening of the crotch part of the soft seat (Figure 7). After that the
parts of the safety board to each other.
5.Step 5 – See Figure 8: Put the tubes of the canopy in the plastic tubes on each side of the backrest. Push gently
downwards to secure the canopy. You will hear a click showing that the tubes are in place.
6.Step 6 – See Figures 9 and 10 : Attach the parent control handle to the bottom opening in the rear part of the frame
(Figure 9). Press the red button on the handle and lift it up to the desired position in height. Release the button (Figure 10).
7.Step 7 – See Figures 11 and 12 : Put the fabric toy bag on the hanger on the parent control handle Using the Velcro
straps attach the bag to the parent control handle (Figure 11). Attach the bottle/ cup holder to the front of the tricycle's frame
(Figure 12).
PRODUCT FUNCTIONS
1.Seat: To turn the seat so that the child faces the parents or the road, carefully pull the button in the bottom of the seat
towards you and rotate the seat in the desired position. Release the button.
2.Backrest – Figure B: The backrest can be adjusted to several positions using the button at the back. Lift it up slightly and
at the same time place the backrest in the desired position. Release the button to lock the seat.
3.Rear Brake - Figure RB: Press down the brake on the rear axle of the tricycle to lock the wheels.
4.Folding frame: a.Figure FOL 1: Fold the handlebar by pressing its side button and at the same time push it forward.
Press the button on the holder for the footrest for older children, and fold it to the frame of the trike. b.Figure FOL 2: Press
the button on the safety board and open the two parts (rails). Remove the seat belt from the rail of the safety board. Lift the
button on the seat and push the seat forward so that it sits as close to the frame of the trike as possible. Reattach the two
parts of the safety board above the seat. c.Figure FOL 3: Remove the parent control handle from the frame. d.Figure FOL
4: Turn the knob at the back of the frame counterclockwise (knob F). At the same time, move the rear of the frame to the
front wheel. e.Figure FOL 5: After folding the tricycle, it should look like as shown in Figure FOL 5. This makes the tricycle
quite compact and easy to store after you come home from a walk.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Cleaning:
•Clean with soft dry cloth. Do not use aggressive cleaning detergents - alcohol or bleach – based ones, or such, containing
abrasive particles.
•Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of damage
of the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
•Clean the tires regularly from sand or dust.
•Keep the tricycle clean.
2. Maintenance and storage:
A. Before each use of the tricycle, check carefully the working order of all parts and connections:
-The screws must be tightened well;
8