KSIX SIROCO BXVENT01 Manual página 3

2.2 Pairing iOS / Android devices
Fan and lighting pairing
To complete the pairing, the fan must be properly installed
and powered on.
1. First, and most importantly, make sure to have your
smartphone's Bluetooth and WiFi enabled.
2. Set the fan on pairing mode. To do so, press and hold the
"Fan ON/OFF" remote control button or turn the fan on and
off three times (each time you turn it on wait 5 seconds to
turn it off again).
3. Access the Tuya Smart
app. Once inside, tap on
add device.
5. Enter your WiFi address
and password. After that,
the pairing will start.
After carefully followingg
these steps, the fan will bee
correctly linked to your
smartphone.
Troubleshooting:
app cannot find the
device, power
device and set it on pairing
mode once more. Make
sure that
smartphone's
and WiFi are on and accept
all the
requested by the app.
If the
off the
your
Bluetooth
permissions
4. If you have set the fan on
pairing mode properly, it
will pop up for you to add it.