Publicidad
Idiomas disponibles
Idiomas disponibles
• In case of visible damage to the hair trimmer or the mains adapter, do
not use the appliance.
• You should only plug the mains adapter into a properly installed soc-
ket that is easily accessible at all times. The voltage of the power out-
let must correspond to the specifications on the nameplate.
• Disconnect the mains adapter from the socket after each use, after
charging, in the event of a fault and before cleaning the device.
• The clipper is not designed to operate with an external timer or sepa-
rate remote control system.
• If you notice smoke, unusual noises or smells, turn off the appliance
immediately and disconnect the mains adapter from the power outlet.
If this happens, you should stop using the clipper until it has been
checked by a specialist. Do not inhale the smoke that has been cau-
sed by burning the appliance. If you have inhaled this type of smoke,
see a doctor as soon as possible. Inhaling this smoke can be harmful
to your health.
• Make sure there are no open flames (eg lit candles) near the clipper.
Use the clipper in a dry environment and never near flammable mate-
rials such as curtains or explosive or flammable gases or liquids.
• The clipper is designed for cutting human hair only.
• All cables must be routed in such a way that they will not be stepped
on or obstructed.
• Never use the clipper with a broken or defective accessory
comb. An accessory comb with a broken tooth can cause injuries.
Hold the cord by the plug and do not pull on the cord.
• Do not place furniture or other heavy objects on the cables.
Make sure the wires are not crimped, especially at the plug and
connector receptacles.
• Do not place the cables on hot objects, corners or sharp objects.
• The hair clipper is designed to work in rooms with a high level of hu-
midity (for example, the bathroom), but not with an excessive amount
of dust. Operating temperature and humidity range: 5°C to 35°C and
85% maximum relative humidity.
E NGL I SH
8
Publicidad
