Ego Power+ LT0300E Manual página 5

SPECIFICATIONS
Voltage
56 V
Luminous Flux/
Brightness (3 panels 600 – 3000 lm (depends on correlated color temperature)
combined)
Approximate run time
6.5 hours at highest brightness,
(with EGO 56V 5.0 Ah
60 hours at lowest brightness.
Battery)
Warm White
Correlated color
temperature
2700 K
Weight (without battery
1.85 kg
pack)
DESCRIPTION
KNOW YOUR CORDLESS AREA LIGHT (Fig. A1)
1. Handle
2. Raised Ribs
3. Main LED Panel (inside)
4. Transparent Cover (Lens)
5. Peripheral LED Panel (inside)
6. Battery-release Button
7. Latch
8. USB-C Port
9. Battery Ejection Mechanism
10. Base
11. Hook
12. Tripod Mounting Hole
13. Brightness Adjustment Button
14. Color Temperature Adjustment Button
15. Power Button
16. Mode Button
PACKING LIST (FIG. A1)
OPERATION
WARNING:
Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced.
Neutral White1 Natural White2
3300 K 3600 K
APPLICATION
You may use this product for flood lighting and area
lighting.
ATTACHING/DETACHING THE BATTERY PACK (Fig. B)
Use only with EGO's battery packs and chargers listed in
Fig. A2.
Fully charge before first use.
To attach
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a "click".
To detach
Depress the battery-release button and pull the battery
pack out.
B1-1 Battery Rib
B1-3 Battery-Release Button
OPERATING THE CONTROL INTERFACE (Fig. C)
C1-1 Power Button
Color Temperature
C1-3
Adjustment Button
Power button
Press the power button briefly to turn the light ON.
Press the power button briefly again to turn the light OFF.
56 VOLT LITHIUM-ION CORDLESS AREA LIGHT-LT0300E
Cool White Daylight White
4200 K 5000 K
B1-2 Mounting Slot
Brightness
C1-2
Adjustment Button
C1-4 Mode Button
EN
5