ATIMA AY2500i Instrucciones De Funcionamiento página 30

ENGINE OIL REPLACEMENT
WARNING
• Avoid draining the engine oil immediately after stopping the engine. The oil is hot
and should be handled with care to avoid burns.
1. Warm up the engine for several minutes.
Place wood blocks 3.5 in (90 mm) or greater under the generator as shown.
2. Remove the rubber cap on the bottom.
3. Place an oil pan under the engine Remove the oil drain bolt and gasket.
.
4.Open the oil check access as show and remove the oil filler cap so that the
oil can be completely drained.
WOOD BLOCKS
rubber cap
Oil Check Access
Then stop the engine.
3.5 in (90 mm)
or greater
Gasket Oil Drain Bolt
30
O-ring
Oil filler cap