Publicidad
Idiomas disponibles
Idiomas disponibles
ADDITIONAL SAFETY
WARNING
Do not stare directly at the laser beam. A hazard may exist if you
deliberately stare into the beam, please observe all safety rules
as follows:
1. The laser shall be used and maintained in
accordance with the manufacturer's instructions.
2. Never aim the beam at any person or an object other
than the work piece.
3. Always ensure the laser beam is aimed at a sturdy
work piece without reflective surfaces, e.g. wood
or rough-coated surfaces are acceptable. Bright
shiny reflective sheet steel or similar is not suitable
for laser applications as the reflective surface may
direct the laser beam back at the operator.
4. Do not change the laser device with a different type.
The manufacturer or an authorized agent must carry
out repairs.
5. CAUTION: Use of controls or adjustments other than
those specified herein may result in hazardous
radiation exposure.
6. CAUTION--The use of optical instruments with this
product will increase eye hazard.
SAVE THESE INSTRUCTIONS
SYMBOLS
12
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Warning
Unlock
Compact Circular Saw With Laser
Incorrect
Correct
Before any work on the machine itself,
pull the mains plug from the socket
outlet.
Wear protective gloves
Wood
Aluminium
Plastic
Tile
Abrasive cutting disc
HCS blade
TCT blade
COMPONENT LIST
1.
SOFT GRIP HANDLE
2.
HEX KEY
3.
LOCK OFF BUTTON
4.
ON/OFF SWITCH
5.
FIXED UPPER GUARD
6.
LOWER GUARD LEVER
EN
Publicidad
