Publicidad
Idiomas disponibles
Idiomas disponibles
Buttons
A. POWER - ON/OFF
B. SPEED
C. MODE
D. TIMER
E. OSC (only from remote control)
Batteries
Remote control is supplied without batteries; before use remote control
open the batteries holder placed on the back of remote control (refer to
the diagram shown on the back of the remote control) and insert 1 battery
CR2025 3V respecting the indicated polarity.To remove the battery, refer
to the diagram shown on the back of the remote control.
POWER - ON/OFF Button (A):
Press Power - On/Off button one time to activate the fan. The unit will
start to operate at lower speed.
Press Power - On/Off button when unit is on to turn it off.
SPEED Button (B):
Press this button when unit is on to select the desired speed. The related
indicator light of speed (X) will turn on in the control panel: "L" low speed,
"M" medium speed or "H" high speed.
MODE Button (C):
Press this button when unit is on to select the desired mode: normal,
natural mode (the indicator light "NA" will turn on in the control panel) or
sleeping mode (the indicator light "SL" will turn on in the control panel).
TIMER Button (D):
When the unit is operating, you can set the timer to switch the fan off
automatically after the set time. Press this button repeatedly to select the
desired time period in half hours increments from 0,5 hours to 7,5 hours.
The related indicator light of timer (0,5H, 1H, 2H, 4H) will illuminate on
the control panel. When all the indicators light are off means that timer is
not setted and the unit will continuously work until you switch off manually
the unit.
OSC Button (E):
Press this button when unit is on to activate the automatic oscillation from
left to right (the "OSC" indicator light will turn on in the control panel). To
deactivate the automatic oscillation press again this button.
Indicator light
X. indicator light of speeds
Y. indicator light of timer
Z. indicator light of mode
W.indicator light of oscillation
17
Publicidad
