Makita UH5580 Manual De Instrucciones página 9

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and unplugged before adjusting or
checking function on the tool.
Switch action
► Fig.1: 1. Switch trigger B 2. Switch trigger A
3. Switch trigger C
For your safety, this tool is equipped with a triple
switching system. To turn on the tool, press two out of
three triggers A, B and C. Release either one of the two
pressed triggers to turn off. The sequence of switch-
ing is unimportant as the tool only starts when both
switches are activated.
Straight cut
► Fig.2
To trim the hedge straight, pull triggers A and B.
Vertical cut
► Fig.3
Cut upwards with both hands pull the switch triggers B
and C and move it in front of your body.
Far area cut
► Fig.4
To trim the hedge in far area with both hands pull the
switch triggers A and C.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Engage the extension cord
CAUTION:
Make sure that the extension cord
is unplugged to the mains outlet.
► Fig.5: 1. Hook complete 2. Extension cord 3. Tool's
cord
When engaging the extension cord, secure it to the
tool's cord with the hook complete. Attach the hook
about 100 - 200 mm from the extension cord connector.
This will help prevent unintentional disconnection.
Waist cord hook
CAUTION:
Do not attach the holder of waist
cord hook to other than the extension cord.
Do not attach it in a position closer to the tool
beyond the hook complete. Failure to do so may
cause an accident or personal injury.
CAUTION:
Attach firmly one hook of the hook
complete to the tool's cord and the other hook of
hook complete to the extension cord. Working with
the tool with a sole hook only attached may cause an
accident and injury.
Using the waist cord hook helps to minimizing a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
► Fig.6: 1. Hook 2. Tool 3. Tool's cord 4. Hook com-
plete 5. Extension cord 6. Holder 7. Waist
cord hook
Press in or pull out the cord through the opening of the
holder.
► Fig.7: 1. Holder 2. Cord
CAUTION:
Do not force the opening of the
holder. Failure to do so may cause deflection and
damage to it.
Arm cord hook (Accessory)
CAUTION:
Do not attach the holder of arm
cord hook to other than the extension cord.
Do not attach it in a position closer to the tool
beyond the hook complete. Failure to do so may
cause an accident or personal injury.
CAUTION:
Attach firmly one hook of the hook
complete to the tool's cord and the other hook of
hook complete to the extension cord. Working with
the tool with a sole hook only attached may cause an
accident and injury.
Using the arm cord hook helps to minimize a risk of
cutting off the extension cord unexpectedly caused by
the loose extension cord.
► Fig.8: 1. Holder 2. Arm cord hook
Attach firmly the arm cord hook placing around your
arm and pass the extension cord through the holder.
The length of the arm cord hook band is adjustable.
NOTE: Do not pass the extension cord through the
band.
NOTE: Do not force the opening of the holder. Failure
to do so may cause deflection and damage to it.
NOTE: Using the arm cord hook together with the
waist cord hook is more helpful.
9 ENGLISH