Triton Blue TR-3000-FG Manual De Usuario página 11

MAINTENANCE AND CLEANING
• 1. IMPORTANT: Always set the output to Zero and wait for minimum 30 seconds before to switch off
the unit. This allows the unit to execute its cleaning process so all the remaining fluid is removed from
the internal circuits..
• 2. Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
• During inspection the following points should be checked:
• 3. All screws used for installing the device and any of its parts should be tightly fastened and may
not be corroded.
• 4. Housings,fixations and installations spots (ceiling, truss, suspensions) should be totally free from
any deformation.
• 5. The mains cables must be in impeccable condition and should be replaced immediately when even
a small problem is detected.
• Attention:We strongly recommend internal cleaning to be carried out by qualified personnel!
• Cleaning the fogger: To prevent obstructions in the heater, pump and tubes, the fogger should be
cleaned on a regular basis: every 100h of continuous operation is a good reference.
• Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
WARRANTY
• Warranty service is only valid under normal use.
• All man-made damage, such as inadequate access to power, the use of
inappropriate accessories, non manual use, damage for transport and other
accidents, non- approved repair or modification, misuse or damage caused by
negligence, improper installation, are not in warranty.
• This warranty does not cover accessories, vulnerable parts, assistive devices,
transportation and maintenance personnel on- site service fee.
• When you can not solve the problem or have questions, please contact us.
User Manual | TR-3000-FG by Triton Blue | January 2024 | www.triton-blue.com | Exclusive Professional Use
11.